Front sway would be black if factory. Sizes are listed in a suspension Sticky

 

Moved to Brakes, Suspension & Chassis where you can find more info..

Stock would be 21 front, 20 rear when it has both from the factory.

Red is def. NOT factory, if you have red front & rear it might be the Eibach 22/24 setup.

 

So just measured what's under the car right now, it's a 22mm up front and the stock 20mm in back.

 

Thats great that you already have Eibachs 22mm front bar. Easy to add Eibachs rear 25mm one.

 

Bummer.

Not tragic, but not what you want to see. Someone took the rear bar back off since it's easy to reach and left the difficult to install front one on the car.

Search around (BST? etc.) for a 24mm rear to add back onto the car. That's as large as you'd want to go without stiff suspension on the car as well and it's a great match for that front bar.

FWIW the SVT version is std. 21 in front with 21 in the rear. Not enough to balance that larger front one you have.

 

Alright thanks for the info, what about the steeda competion rear bar? Sailor you in the Navy?

 

Steeda Comp. bar (~27mm) is a bit much, particularly for the street, and without lower/stiffer suspension has a tendency to break rear lower control arms from fatigue.

Tail happy setup is an Auto-X special purpose way to go.

24 will still get the rear a bit looser with your 22 front, but more balanced in reaction.

P.S. - No Navy, spent some time on Lake Ontario near here for the larger boat sailing - picked it up first at scout camp and did little boats whenever the opportunity presented.

 

Go with Eibach sway adds great improvement to handling.

 

Check buy- n- sell section.