Is it water or does it also have antifreeze in it

Just water gets there through washing the engine , rain blowing in etc

Antifreeze gets there when the head plug leaks thats in where the 4 plug wires are

Which do you have ?

Tom

 

I had the same thing happen to me once, it actually leaked down and was causing misfires. I used a suction bulb and some tubing to get it out of there. Had to get new plug wires too.

 

Im going to take pictures here soon

Sent From Your Moms Room

 

#1

#2

#3

#4

And what the end of the plugs looks like

Sent From Your Moms Room

 

Is that just murky water? it almost looks like solidified and cooled bacon grease.

Suck out with shop vac, or blow air through until evaporated. looks like there is no oil, so I would not say valve cover is a problem.

Get new plugs and wires. also check the status of the plugs to see if they show any evidence of un-normal combustion.

I am not sure on the though of the dielectric grease that they try to up sell you at the parts counter, but that should provide some further isolation of the sparkplug to wire contact.

 

It also sometimes gets in there if you have have the plastic coolant distribution tube at the front of the car crack and spew fluid all over the engine bay. Happened to me once.

 

I think im going to just get a contour v cover kit from massive new wires and new plugs and call it a day after i have a buddy at the shop fix it up for me...i dont have all the tools or time for that but i do have a credit card...which i hate to use but, hey has to he done

Sent From Your Moms Room

 

Thanks for the help guys

Sent From Your Moms Room

 

LOL

Turkey Baster -> http://www.walmart.com/ip/Mainstays-Baster/14964949
$2
Or use a tampon.


But hey if you need an excuse to spend $150 be my guest. You'll still have to get the water out.

 

The same issue came up llast week.
http://www.focusfanatics.com/forum/showthread.php?t=321094

 

ordered the massive v cover kit...i asked them to PC it metalic silver...the same color as there adj end links...should look sick...now i just have to get wires and motorcraft plugs like lou suggested, its a shame cause the wire i have now are/were nice 8mm wires... thanks for the help guys again...

 

Moved to "General Technical Chat".