Let's pick a tech day in September. Would be at my house again....I will BBQ again for everybody. Bring any parts you want to get installed. Vote for which date:
9/11
9/18
or
9/25...IS IT!!
9/11
9/18
or
9/25...IS IT!!
Tech day....
voortrek3
21 - 40 of 118 Posts
Joined
·
9,758 Posts
I think it looks much better wingless but thats just my opinion
yess buy some! sears! craftsman
Joined
·
1,275 Posts
Mark me down, Don't know if I will have anything to install but I sure can lend a extra hand. I just requested the day off today.
Joined
·
759 Posts
Now the ? On the strut braces is 3/16 or 1/4 wall tube
If I don't know witch on you want I can't make it and I can't remember how much $ I wanted but let me look at an old post I will tell you then
Sorry I haven't been on in quite some time phone took a dump been moving and on top of all that. I got my race car this week end and also had to pull an svt motor for 03boostreadysvt and now I might need to rebuild a svt on top of all that
Posted via FF Mobile
If I don't know witch on you want I can't make it and I can't remember how much $ I wanted but let me look at an old post I will tell you then
Sorry I haven't been on in quite some time phone took a dump been moving and on top of all that. I got my race car this week end and also had to pull an svt motor for 03boostreadysvt and now I might need to rebuild a svt on top of all that
Posted via FF Mobile
Joined
·
513 Posts
I think for now just the front upper stress. I am not sure what thickness you had on your coupe but something like that. As far as I remember there were no fitment issues and nothing had to be moved right?
Also, if you are too busy with things, I am in no rush. Take care of what you need to as far as i am concerned. I want to rattle can it silver before I put it on to match to my FSWerks CAI anyway.
Do you have pics of the the lower front stress? You have piqued my curiosity. The wife doesn't want me to get a rear due to loss of trunk space and the ability to carry larger items with the seat down.
Joined
·
759 Posts
I under stand about the trunk space but the other day I put a window ac unit a vacuum a bumper to a Sudan and some other thing and still was able to fit a big box in Tue front seat lol
As the bar taking up space there has only been one time I went dam bar had two bikes and I had to try to cut a third one In but other thenthat the trunk don't open big enough to fit really big this like you put in a hatch its still a dam trunk lol
I asked only about the size because some people care about weight its about a 1-2 lbs difference but personally I chose the 1/4 better rigged
Posted via FF Mobile
As the bar taking up space there has only been one time I went dam bar had two bikes and I had to try to cut a third one In but other thenthat the trunk don't open big enough to fit really big this like you put in a hatch its still a dam trunk lol
I asked only about the size because some people care about weight its about a 1-2 lbs difference but personally I chose the 1/4 better rigged
Posted via FF Mobile
Joined
·
411 Posts
Ill have to see if I can make this, had a blast last time.
Posted via FF Mobile
Posted via FF Mobile
Joined
·
759 Posts
Here's a list of the people who are planning to or might make the tech day on 9/25. We'll be starting at 0900 and I'll have the BBQ fired up for lunch for those who attend. Be sure and PM me if you need the address and/or want to attend and don't forget to bring whatever tools you want to bring i.e. jack stands, etc; etc. -Cliff
Voortrek3
APMRDAL
dung1sm
lowfoc
Z63R
goldse
SVTF4243
gr1mr3ap3r
bluefocuzboi01
PumkinSvt
2010_SES
Duratec 2.3
svtfriver14
Rotozuk
Lenny_G
Run_ZX3
Voortrek3
APMRDAL
dung1sm
lowfoc
Z63R
goldse
SVTF4243
gr1mr3ap3r
bluefocuzboi01
PumkinSvt
2010_SES
Duratec 2.3
svtfriver14
Rotozuk
Lenny_G
Run_ZX3
21 - 40 of 118 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
