i worked at discount tire for about 5 years and have never seen a 4-108 on any other cars but the foci. not saying there is not one but it is rare or not a car that many get rims for. I did about 5-10 sets of rims a week during the summer months and never seen another with that pattern.

 

Audi has a few cars that have the 4x108. The Contour also has the 108 pattern.

 

you hear something?

 

Audi 80/90
mercury cougar
Older Saab's
Ford contour
Ford Mustang (fox body years) (i think)
'93 volvo 850 series

those are the ones I know of

Mouse

 

Yeah...I know that the foxbody Mustang Turbine wheels will fit on a Focus.

 

are you sure about the volvo 850 series?? most older volvos are an offset 5 bolt pattern...not a 4 bolt.

 

Ford Tempo

My old 15" mags from my 84 tempo bolted right up to my '05 Focus. That was until I got my SVT rims.

 

a lot of VWs also.

 

See here:
http://www.focusfanatics.com/forum/showthread.php?t=74824
Here:
http://www.focusfanatics.com/forum/showthread.php?s=&threadid=21816
And here:
http://www.discountedwheelwarehouse.com/Vehicle_Bolt_Pattern_Reference.cfm
^^^Look for 4X108 with 63.3mm centerbore

 

Best to stick with Ford product wheels. The center bores on most of the non-Fords don't match. I have some Contours that bolt right up but even with these there is a slight difference, the wheel is a little thicker so the studs only engage about 5 turns vs 7-8. Solution for that is longer studs.

 

Yea,I learned that fast.You can take the front studs and put them in the rear for more length and Advance auto has 1/4" longer 12x1.5 studs for the front.Some rims hubs are too thick to just bolt on so be careful and make SURE you catch at least 8 threads.Not too cool to watch your own wheels passing you.....

 

the american focii are 4 stud? wow [80?]

mines a 5 stud, which makes things harder again

 

4 stud peugeots are 108 also....

 

Thanks guys!