Focus Fanatics Forum banner
Cancel
Create thread New Garage Forums

2015 SE Sedan Fog Light Install

Tags
fog light install mk3 mk3 2015 se
Jump to Latest
412 views 2 replies 2 participants last post by  ChickyChris  
C
#1 · (Edited)
Hey everyone.

I had the bright idea to give my Focus SE a 10 year (recent TCM-replacent survival) glow up. Adding some new head and tail lights, replaced the mirror indicators and getting some indicators for the rear bumper as well.
Anyway, what the Title says. I thought adding OEM fogs would be plug-n-play, but reading through old posts it clearly isn't.

I have the OEM fog light/headlight knob. I have some fog lights and the plastics to put over them. I had to buy the square expansion nuts to fit in the fog light screw slots. I have access to a programmer for Focccus

The harness, and compatibility, are where I'm stuck.
I see the part number CV6Z-15K867-B mentioned a lot.
I read about connectors behind the driver's side fog light hole, but haven't seen posts with pictures and video showing exactly what to look for or where/what to plug the harness into.

I have these connectors (pictured) in my driver's side fog light cavity. They both look plugged in already. Am I stuck going for an aftermarket harness and dashboard switch for my fogs? What am I looking for here?The bigger connector looks like it would fit the recommended fog harness, but obviously... its plugged in. 🤔
Image
 
#2 ·
That looks like the wrong connector. The one you need is the one dangling loose in my photo. When I cracked open my bumper the first time to add them, it had a plug on it that made it look like a male connector, so make sure it's the right one. If you can't find it, make sure you have Fuse F75 in your passenger footwell (should be a 15-amp fuse). I've yet to see a car with that fuse that didn't have the connector, as that is only added if the foglight wiring is there. If you don't have that fuse and connector, your car won't have the wiring in the dash and harness for foglights.

Image
 
C
#3 ·
Thanks for the great image!
I verified I DO have the 15 amp fuse in spot F75
But I guess I'm at a loss for my Focus until some time where I can get a body clip tool. I've taken my headlights out and looked down. Peered in the fog light holes every way I can and I just don't have the harness there.

Where your fog light harness is clipped down, I just have one of the harness for those 2 connectors which I also see in your picture. Will update when I make some more progress on this.
 
Focus Fanatics Forum
posts
5.8M
members
203K
Since
2003
A forum community dedicated to Ford Focus owners and enthusiasts. Come join the discussion about SVT performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
General Technical Chat Ford Focus Builds & General Showroom MK3 Focus MK1 Focus ZETEC Performance (2000-2004)