[f-250]

push in to start problem

Morning, eventually that won't work either. The problem is not in the key and lock tumblers but in the housing that it fits into (part # 9L8Z-3511-A) for a ford escape or a mercury mariner. I think the ford focus is the same number but double check with parts for compatability. Mine is at the point where even pushing in hard when turning key is only working intermittently. It is possible if you purchased a push button start for the dash. About 29 dollars, you still have to turn your coded key to the run position and then push the button it may bypass the worn mechanism I am waiting on a response from the seller if this will work. There is a solution on this website for installation without wheel removal for this part. Hope this helps

 

[f-250]

The Cure for pushing in key to start

Went on line after a ton of research and for 29 dollars, I bought a start button for my 2008 mercury mariner premier. Installed above the key on the access panel above the key. Now I turn the key to the on position push the button and it starts right up. Shore beats changing the whole ignition housing. My wife is very happy. Gives it a custom look and works like a charm. Hope this helps. three wires to solder, one ground to attach and make a hole for the push button and a few tywraps to pretty it up.