Focus Fanatics Forum banner
Status
Not open for further replies.

Parting out: 02 Turbo SVT

9.6K views 50 replies 23 participants last post by  stevus prime  
#1 · (Edited)
Wrong time of the year to be selling a car like this (well, at least in my climate!!!). So it's time to part her out.

Car will be parted to bare basic shell. I'll probably keep the harness in it and leave the suspension (with reg spindles) so it's a roller. Essentially everything you see is for sale. I'm keeping the SVT sideskirts so thats about it. As of today it's still a complete car, but I should be completing the stripping fairly quickly so there should not be much waiting. If you dont see your item listed feel free to ask.

Chassis is a real 2002 SVT with 83,xxx miles. Clean clear IN title. RUST FREE.

Format = price + shipping cost

Folks in the IL, WI, MN, IA, SD, ND and St. Louis areas - I can ship the large items (seats, hood, bumpers) for substantially less then the costs published below . Please inquire.

Long Block
Head was hot tanked, skim cut for squareness
CAT Springs and retainers
3 angle valve job
Block was hot tanked, torque plate bored and honed (.007" over)
Mains line bored with studs in place
Rotating assembly fully balanced
All machine work meticulously over-done by DSS Racing in St. Charles, IL
Eagle Forged H Beam Rods
SuperTech Forged 9.0:1 pistons
ARP Main studs
ARP Head Studs
Clevite H Series brgs
Machined baffle for main studs
Focus Central 2 pc Underdrive pulley kit - clear (silver) anodized
Will be sold fully assembled ready to go. Includes water pump, oil pan, valve cover, front engine/timing cover. ~500 miles on this beauty. Shiny black paint on the block, she looks brand new.

SOLD ships via truck to biz address. Home deliv add $50

Drivetrain parts
Focus Central 67mm TB Black anodized - SOLD
Complete SVT Intake mani - $150 +$10 ship
VF Engineering Pass Side Engine mount - $100 + $8 ship SOLD
Getrag 6 speed trans shifts perfect - $400 + $80 ship SOLD
SVT Shift cables - $75 + $15 ship
Energy Suspension lower mount inserts in OE housing - $25 + $8 ship SOLD
Massive MSX 90 Ignition wires Red - $30 + $8 ship


Turbo Kit
SPA Cast turbo manifold black ceramic coated
Turbonetics Dual Ceramic Ball Bearing T04B turbocharger
Massive Superman plate 2 bolt WG Adapter
Synchronic 38mm Wastegate
HKS SSQV Blow off valve
All SS US made T Bolt Clamps
Multi Ply silicone couplers
Lightning Intake Air Temp Sensor
Lightning MAF/Housing
60 lb Siemens Injectors
LARGE intercooler
K&N Air Filter
2.5" SS down pipe
2.5" charge piping
Includes complete breather system
Moroso catch can
Aluminum mounting bracket (specific to a battery relocated car)
-8 AN Nylon covered SS reinforced vent hoses Aeroquip fittings
Custom Aluminum oil seperator adapter
Autometer Cobalt series Boost/Vac gauge in Autometer cup mount
Tuned via SCT Pro Racer Package! (yeah the $800 one) - included!!!

This kit is ready to rock. Needs nothing.
$SOLD

Stopping
Real SVT Kit
ARP Wheel studs
New rotors, pads & rear calipers
Russell 6 pc SS hose kit
Front spindles
Rear spindles

SOLD



Inside
Racing seats - appear brand new. Adapted well to factory slider brackets - $200 + $125 ship SOLD
Autopower Roll Bar Bolt in - Their "Race" series. 1.75" .120 Wall DOM Tubing. Great shape. $345 + $100 ships via truck to biz address. Home deliv add $50 SOLD
RCI 5 point 3" Harness belts Oct '12 date - $80 for the pair + $10 SOLD
SVT Gauges - Main part does not "glo" - it was not plugged in - not sure if they work. But aux gauges do. 83K. $75 + $8
SVT audiophile trunk mat pretty nice - $50 + $15
SVT 3 pc pedal set - SOLD
This is a mis-matched non SVT interior so that's available, I have several other light and dark non SVT interiors as well.

Outside
Carbon Fiber hood. This one needs some body work and some new clear / sand / buff. SOLD ship
SVT rear bumper - Nice! $SOLD
Doors are mint, good fenders, hatch is nice - SOLD
SVT Grille - Only one unmolested tab but still can be made to work with some washers - $20 + $10 SOLD
Glass is all good - SOLD

Rollers
Toyo Proxes RA1 Road Race tires in oversize 235 40 17, good shape lots left
SVT 17x7 5 Spoke wheels
SOLD


Can accept cash, paypal or CC. NO DIBS. First to PAY gets it.
All items are located here in the NW Suburbs of Chicago, Spring Grove.

Paypal to: superpowers60@hotmail.com



--------------------------------------
Image





















Mobile friendly version: Parting Out:
 
#13 ·
No, they do not have any form of airbag in there, nor do I believe there have ever been any aftermarket "racing" seats that do.

If yours have OEM airbags, there are fairly simple modifications one can do to the seat plug to eliminate the code. Jumper wire and a resistor IIRC.
 
#19 ·
Yeah I'm not sure the exact part number on it.

Compressor has 3" inlet, 2" outlet. Turbine is T3 inlet 4 bolt round outlet. Big bitch.
 
#20 ·
really interested in things in this order. wheels/tires then roll bar and then race harness. sorry but those seats hurt my eyes lol

send me some up close pictures of the wheels/tires mounted on the car for how well those oversize tires clear the fenders along with some tread depth measurements. how much life exactly is left in those boogers?

also how in hell can you ship wheels and tires that cheap? i just shipped my EAPs by ups this morning and it cost $200
 
Save
#23 ·
I dont have any more pics of the wheels on the car other than whats pictures in post 1. The car is all taken apart as of now, obviously. I'll get some pics of the wheels and the tread depth info for you tho. The fit well. I run 235 on the front of my road race car as well, with FRPP springs. I pulled the fenders a bit by hand/folded over the fender liner tab and all is well. I get some decent shipping rates these days, shipping stuff day in and day out for 10 yrs and you figure out the best way.
 
#22 ·
Yes!!! It's OEM type stuff. The trans is still bolted to the engine so I cant tell you all the details, but I know it worked great, grabbed good, good pedal. I can split it later today/tomorrow and give a look over
 
#26 ·
It would not have. Car originally had a CM S3 / AL FW. Car was running on the 8PSI tune when it was complete for that reason - the stock clutch.
 
#27 ·
Interested in the rear bumper if you still have it
 
Save
Status
Not open for further replies.
You have insufficient privileges to reply here.