Sounds good to me too, it would help when buying replacement parts

 

Exactly my thoughts, I'm in contact with a guy at FordPartsUK and trying to figure out what color I need and that's part of the reason why I'm interested in getting this list started so we can compare colors with euro spec cars as well.

 

Keep up the good work!

This is now a "stickie" for easier reference/expansion to cover all the options.

(I'm sure it'll expand into a useful "how to")

Cheers

 

Thanks! That's what I'd like to see this thread turn in to.

 

US Spec Interior Color Codes:
EW –

2W - Charcoal Black Torino Leather (H-L) - (Titanium)

 

I believe this code is also used with the 201A option package on the SE (I have this combination).

 

Think my interior code is 97s. US spec 2013 with Tuscany red leather

 

Mine has black leather. (It's the cheapest leather I've ever seen in a car.) I'm partially convinced it's actually "Pleather". Has anybody swapped Fusion seats into a Focus? Is that leather any nicer? I actually would like a power pass seat also.

 

It wouldn't surprise me if it were pleather. I don't think the fusion seats would bolt in properly, not to mention airbag wiring.

 

To get nicer seats, changing/modifying the seat tracks is doable. Not afraid to tackle wiring either.

 

It is real leather just a lower quality I'm sure... had a loaner 2014 mkz while my clutch packs were being replaced...same shitty leather but that had a/c seats...

 

Here is the red..needs a good detailing inside

 

Looks pretty good though. If you don't mind can you add the color code off the vin sticker?

 

I wonder what mind is. It like a tan mesh

 

The interior code is located on the white sticker at the front of the driver's side door frame.

 

Helpful, Love the black and red, Looks sharp. I have a 2012 focus titanium and I don't have the code cause it is in the shop, but I thought the color listed was Tuxedo Black

 

That's the exterior color name. The interior color has color coding as well, not just a color name.


Sent from my iPhone using Tapatalk

 

Trying to get some info here, I really need help finding out what color my factory A-pillar trim is. It's the grey shade with a black cloth interior found on the basic 2013 Focus S model. Can anyone tell me what paint to get to match it?

I found this a long time ago and I can't locate the thread I got it from. Somebody said this was a close enough match to Ford's:
https://www.amazon.com/dp/B000PL24O...ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=4V2QPO7NECXJ&coliid=I1NV1L2C7ZIB25

Otherwise, I may just paint it flat black. Any recommendations on brands of paint? And do I need to coat it with something if it's just an interior part?

 

You need interior color code EW.


Sent from my iPhone using Tapatalk

 

You need interior color code EW.


Sent from my iPhone using FF Mobile

Yeah I have that but how do I take that and go about getting the paint? There are so many brands and shades, can I ask Ford exactly what to do?

 

Wait, your interior A pillar trim is already the charcoal black?
Or are you trying to make it that color?


Sent from my iPhone using Tapatalk

 

Wait, your interior A pillar trim is already the charcoal black?
Or are you trying to make it that color?


Sent from my iPhone using FF Mobile

I'm trying to paint my GlowShift triple gauge pod overlay which I just received Saturday. It came in a horrible, horrible glossy, textured and sparkly plastic. The first friend I brought over confirmed that it looks cheap. I'm planning on painting it the factory trim color for my EW car, which would be a light grey. My car has black dashboard and cloth seats with the light grey A,B,C pillars and light grey cloth rooftop.

I think there are some people here who've made everything black or had it come that way on an ST/Titanium? But I'm only trying to match the grey with paint. If I can't get anything close enough I'll just paint it flat black.

 

That's a the medium light stone color, sir. If you want to change your interior A and B pillars out I would suggest getting the ST ones and then find the Ford interior color spray paint in ebony black, I believe it is, which is the ST interior trim color.

Can you post some pictures?


Sent from my iPhone using Tapatalk

 

That's a the medium light stone color, sir. If you want to change your interior A and B pillars out I would suggest getting the ST ones and then find the Ford interior color spray paint in ebony black, I believe it is, which is the ST interior trim color.

Can you post some pictures?


Sent from my iPhone using FF Mobile

Oh, thanks! That's exactly the kinda info I was looking for. I'll look for that color

 

Let me do some digging to see if I can help. I don't have a color chart, I've just done a lot of digging in the past for interior color codes to try and gather up the information.

I know that that light cream color goes with the medium light stone color scheme, I don't know what color it is specifically. I can find part numbers and such to go with it.

I think your best bet, even though it might be a bit more on the pricey side, would be to swap out your A and B pillars for the ST ebony black pillars and paint match your gauge pod pillar to that.

You might also try giving the dealership this part number and asking them what color it is specifically. But like many dealerships they might still be useless about anything aftermarket.

http://www.tascaparts.com/ford/focu...ne/body-cat/interior-trim-pillars-scat/?part_name=w-s-pillar-trim&position=left

I'm the mean time I've got a couple feelers out to see if anyone with one of these sitting on a shelf can look at them. I don't have my original ones anymore and I didn't think to look at them before I chucked them to see if they had a color identifier on them. We'll see what comes up!

Sent from my iPhone using Tapatalk

 

Let me do some digging to see if I can help. I don't have a color chart, I've just done a lot of digging in the past for interior color codes to try and gather up the information.

I know that that light cream color goes with the medium light stone color scheme, I don't know what color it is specifically. I can find part numbers and such to go with it.

I think your best bet, even though it might be a bit more on the pricey side, would be to swap out your A and B pillars for the ST ebony black pillars and paint match your gauge pod pillar to that.

You might also try giving the dealership this part number and asking them what color it is specifically. But like many dealerships they might still be useless about anything aftermarket.

Windshield Pillar Trim, LEFT for 2012 Ford Focus|CV6Z-5403599-BA : Genuine Factory OEM Parts & Accessories | TascaParts.com

I'm the mean time I've got a couple feelers out to see if anyone with one of these sitting on a shelf can look at them. I don't have my original ones anymore and I didn't think to look at them before I chucked them to see if they had a color identifier on them. We'll see what comes up!

Sent from my iPhone using FF Mobile

Thank you! You put out a lot of meaty details in that post... I have to chew it down but basically- do you think if I take it off there may be a color identifier on them? I can do that when I test it out. Now, that's an awesome website to have knowing that I can order another OEM panel if I mess this up. Especially the clips! Any detailed advice on taking it off without breaking those clips? I've seen several photos an diagrams but its still not making much sense to me.

Okay here's another thought, what about wrapping it? Can I wrap the gauge pod (Or is the shape too complex to do with 1 sheet of wrap?) and wrap the right side pillar? Any thoughts on the durability or wrap on these plastic panels during the hot and cold days?

It looks like I'll have to pick my preference- black black or grey black or grey grey. Calling my dealership the other day didn't help. Maybe I'll try another dealership and provide them the part code# you just helped me find.

 

You don't need a vin, just search by year make and model.


Sent from my iPhone using Tapatalk

 

You don't need a vin, just search by year make and model.


Sent from my iPhone using FF Mobile

I used the info in this thread where somebody dedicated time to changing his trim to black: http://www.focusfanatics.com/forum/mk3-focus/319834-pillar-trim-removal-difficult-4.html

He says he spent $25 on each piece... I'm trying to use the website now to find it but the website is being SO slow...

It looks like you've participated in that thread too btw, haha.