well that company doesn't anyways. Not all companies have the same issue with Quality. The last set I tested (no led euro) went through great, no problems at all, and actually a little better Quality then the Ford OEM ones....
How's that goat behaving? any updates? [race]
Affirmative. I know have 600 miles on the lights and I'm ready to do a thorough write up. [thumb]
the projector is the low beam; the innermost light is the parking light;the LED is a permanent DRL which will stay on when you turn on your engine and turn off when you turn off your engine.i'm confused about which lights are which.
is the projector the low beam or the high beam?
is the innermost light the parking light?
is there a permanent DRL or can it be can the "DRL" be a parking light as well? It would be nice to be able to turn the DRL's on/off.
any chance someone out there can photoshop the lights jdubhack's lights onto a tuxedo black focus? I've taken a liking to them again... I know i'm back and forth.
Thanks.
This is not correct. I will address this in a bit.
Yellow, and you're correct. With no power source to that wire, no DRL.
when you say the inner most light "does nothing" , can you give some detail as to how much "nothing"? [giggle]
When I say nothing...I mean nothing. Absolutely nothing. It's a dummy light and not used within the US market. As a matter of fact, the wire is cut leading to the bulb connector.
I don't think it's illegal, just not required by law. There's no need for it. You could theoretically wire a bulb in there but the housing would require heavy modification as well as wiring to go with it. I don't see how it would be worth it.that's sad. is it illegal in the US or what? seems like a waste. If i could I'd add a parking light. on the bright side the dummy light (surrounding lens area) seems to reflect the blue-ish light from the projector, and looks cool. or am I once again suffering from visual illusion?
I dont know how you installed them, but they work like what I said on my focus.
They will operate normally. The single red wire connects the LED and fuse box by their own.
yep, that is what I did. the red wire is placed in #14 hole and the fusebox.
#14 hole is a useless connector in the U.S. version I think.
US headlights have to be DOT approved to be legal.that's sad. is it illegal in the US or what? seems like a waste. If i could I'd add a parking light. on the bright side the dummy light (surrounding lens area) seems to reflect the blue-ish light from the projector, and looks cool. or am I once again suffering from visual illusion?
