Focus Fanatics Forum banner
1 - 7 of 7 Posts

koke'sfocus

· Registered
Joined
·
1,117 Posts
Discussion starter · #1 ·
hi there im a newbie on this of the tunning cars i have a 2008 focus can i swap a 2.3 head from the focus st? is it possible? what do i need to change? thanks [8D]
 
Discussion starter · #2 ·
no one?
 
you basically need the whole engine. I havent done it, but a lot of other people have asked the same question, and thats the answer they usually get.
 
yes its possible. you'll need the upper 2.3 engine harness to add the runner control valves to the mix, unless you plan on installing the cosworth IM at the same time, you'll need a tune.

and thats pretty much it.


BUT.... from what f2 focus has said, the 2008 cams have changed so... you may not be able to do it.



so yes you do and no you dont have to swap the motor, for a 2.3 swap.
 
Discussion starter · #6 ·
yes its possible. you'll need the upper 2.3 engine harness to add the runner control valves to the mix, unless you plan on installing the cosworth IM at the same time, you'll need a tune.

and thats pretty much it.


BUT.... from what f2 focus has said, the 2008 cams have changed so... you may not be able to do it.



so yes you do and no you dont have to swap the motor, for a 2.3 swap.

thanks
 
1 - 7 of 7 Posts