no need for a new MAF?

brummy · May 22, 2007

Ok, I really need to make a notepad document of this so I can just copy and paste it. But so far, my goals and plans are: stock 2.0L Zetec with a 65mm throttle body, going to use a 14b at the stock 8 psi, a DSM side mount, and 42lb injectors, wanting around 200whp.

I was sort of told this on FocalJet and asked again to verify, but received no responses. With my plans and setup, will I not need a larger MAF and be safe with just a 3" MAF housing for the stock unit?

1turbofocus · May 23, 2007

Go to fj for laughs come here to get help and questions answered properly

I would use a 3 inch MAF Tube and a Diablo MAFia with your stock MAF electronics

Tom

brummy · May 23, 2007

Ok, and how much do you expect that will set me back?

brummy · May 23, 2007

I figured I won't bombard this place with threads, so I'll post this here. With only 8psi of boost, a side mount, and only looking for 200whp, a BOV wouldn't be neccesary would it?

Piinkhandcuffss · May 24, 2007

u can pick up a 1g bov cheap just about anywhere im not 100% sure if u need it but u should get one it protecs ur engine and turbo look on
boostedince.com the guys on there have tons of parts laying around and arent to bad on prices

no need for a new MAF?

brummy

1turbofocus

brummy

brummy

Piinkhandcuffss

Top Contributors this Month

Recommended Communities