Focus Fanatics Forum banner
21 - 29 of 29 Posts
Discussion starter · #22 ·
It really sounds like the switch on the clutch pedal. If it popped out of its mount on the clutch pedal or just plain backed out a little that would explain your issue.
I had a look at the switch and disconnected it today it's seems OK to me but i didn't have a multi meter to test it is there any other way I could do a test?
 
Discussion starter · #23 ·
I did kind of do a test I disconnected the switch and tried to start the car as normal and ran FORSCAN at the same time and it gave me code P0831 - Clutch Pedal Switch A Circuit Low which obviously is because I disconnected it and I thought if the switch was dead wouldn't I get some sort of code like that?
 
Discussion starter · #27 ·
OK so I have had the car in a local garage today they said everything looks OK no fault codes not fuses or relays gone starter motor OK imobilsor OK wiring looks OK so it's of to a auto electrician tomorrow to see if they can spot anything
 
Discussion starter · #28 ·
Hello guys good news!!

So the second garage have managed to fix the car they said the computer's wasn't functioning with each other for some reason and updating with the latest software has sorted the problem thanks for the help guys hopefully if anybody else run's into this problem this could be your issue!
 
Hello guys good news!!

So the second garage have managed to fix the car they said the computer's wasn't functioning with each other for some reason and updating with the latest software has sorted the problem thanks for the help guys hopefully if anybody else run's into this problem this could be your issue!
Thank you for reporting the solution! Hope it last!
 
21 - 29 of 29 Posts