Focus Fanatics Forum banner

1 - 6 of 6 Posts

·
Grey Friar
Joined
·
1,159 Posts
Discussion Starter · #1 · (Edited)
[edit: SOLD!]
These are the BEST cams you can get for increased power in an ATX Zetec street application. The amount of increased lift and duration over stock, biased toward intake, retains low end torque, while increasing torque and HP throughout the rpm range, 1000 to 6500 rpm. Of course, these are also good for MTX NA builds... or use this exhaust cam with a stock intake cam for boost applications (or this intake with more aggressive exhaust cam).

Specs:
Crane PN: 223-0010
Advertised duration: 232 int / 228 ex
Duration @ 050in: 210 int / 206 ex
Lift: 0.374in int / 0.366in ex

Orfordville, WI

$250 shipped (retail is $380 to $400 shipped). Sold as a set only (you can buy one if you can get someone else to buy the other).

Photo available on request

John

PM is best
 

·
Vince your Moderator
Joined
·
5,074 Posts
Does one have to have the head machined for any clearance issues?
 

·
Grey Friar
Joined
·
1,159 Posts
Discussion Starter · #3 ·
Thanks for asking, but no, not at all. Lift is well within range. These are drop-in.
 

·
Grey Friar
Joined
·
1,159 Posts
Discussion Starter · #4 ·
bump
 

·
Grey Friar
Joined
·
1,159 Posts
Discussion Starter · #5 ·
Price drop... rock bottom, can't go lower.
 

·
Grey Friar
Joined
·
1,159 Posts
Discussion Starter · #6 ·
Sold!

Enjoy them Mike!
 
1 - 6 of 6 Posts
Top