Focus Fanatics Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
13,065 Posts
Discussion Starter · #1 ·
I checked the fuses, for both Rear and Front Windows. I have a ZX3 so it only has fronts, but I just figured I'd check in case. Both fuses are intact and happy.

Nothing else appears malfunctioning, both doors' lock switches work, as does my sunroof power switch. But both sides windows do not. The driver's side may have gotten wet because oen day I was getting in during a downpour (totally insane rain volume) but that was only the driver's side, and I did wipe off the door panel, in case it woulda made a difference.

So, are there any other "easy" diagnoses I could make, or should I take it into the dealer? I've got til the end of July/another 5k miles before my warranty's up so it's still a viable option, but if there's an easy solution I'll look into it first before making an appointment?

Also, on an unrelated note, I finally did my foglight mod this afternoon, successfully! Although at first I put the spades in R12, which made my fogs never work, and my headlights stay on even without the key in (if you were wondering)! Oops.
 

·
Registered
Joined
·
13,065 Posts
Discussion Starter · #5 ·
penguin said:
P.S. I just checked the Owner's Manual and yes, you are correct and I am mistaken, the power window lockout appears to only be on vehicles with rear windows.
Ah ok then, thanks for checking. I figured as much, but boy that'd be an easy fix if it was the case! I hate showing up someplace and being like "can you fix this?" and then it's something [duh] like that. But I guess in this case I'll just contact the dealer.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top