[ELCouz]

Hi,

Before you tell me that's a passenger car and buy a ST which also wheel hop but less, I would like to minimize it.

Already switch the rear mount for the electric focus one.

Next... suspension upgrade?

What do you recommend?

Torque Damper?

PS: yes,i've disabled TCS.

 

[Kent253]

That's a passenger car and buy a ST which also wheel hop but less.!!!

 

[Kent253]

Hahahah i'm so funny. CFM makes an "adjustable" RMM. Maybe that could help.

http://www.c-f-m.com/performancepar...13-14-Focus-ST-ST250-95p4379.htm#.VAtnakuPTpx

 

[Kent253]

And under what circumstances does you car wheel hop? What tires are you using?

 

[Juicedz]

Try launching one at the track bahaha. Horrible wheel hop!!!

 

[Kent253]

Try launching one at the track bahaha. Horrible wheel hop!!!

Did not went to the track yet. Maybe upgrade all 3 Engine mounts. I bet ST mounts fits.

 

[suss6052]

Did not went to the track yet. Maybe upgrade all 3 Engine mounts. I bet ST mounts fits.

Nope the only equivalent mount is the RMM which there was the bulletin to replace the base Focus mount with the E-Focus Mount, along with all of the other mounts.

The PSMM on the N/A only uses two bolts to hold it in v.s. the three on the ST and they have different spacing, and iirc the transmission mount is also different.

 

[Kent253]

Nope the only equivalent mount is the RMM which there was the bulletin to replace the base Focus mount with the E-Focus Mount, along with all of the other mounts.

The PSMM on the N/A only uses two bolts to hold it in v.s. the three on the ST and they have different spacing, and iirc the transmission mount is also different.

Damn!!!

https://www.turbotechracing.com/productcart/pc/viewPrd.asp?idproduct=5478

 

[Kent253]

Turbo Tech Racing's Upper Engine Mount for the Ford Focus 2.0L (Non-ST). The Upper Engine Mount eliminates movement that your factory mounts have, maximizing torque and the transfer of energy to the driveline. In addition it reduces wheel hop!

 

[Jburks]

Maybe you just need a stiffer RMM. I know the EMM was supposed to give you more stiffness while still keeping things reletivly stock. Try going with the COBB RMM or i read the the FSWERKS RMM is pretty stiff. I'm sure upgrading tires and supsinsion will help a lot too, put your probably going to spend a lot!

 

[CunFFS13]

What did you expect!?
That's a passenger car! Get a muscle car!



When I wanna feel some high speed driving experience I drive my Mini Cooper S

 

[Kabigon]

It's caused by driver error.

Patient: Doctor it hurts when I do this.
Doctor: Well don't do that.

 

[Juicedz]

What did you expect!?
That's a passenger car! Get a muscle car!



When I wanna feel some high speed driving experience I drive my Mini Cooper S

[giddy] that's a clown car.

 

[Seriously Focused]

Hi,

Before you tell me that's a passenger car and buy a ST which also wheel hop but less, I would like to minimize it.

Already switch the rear mount for the electric focus one.

Next... suspension upgrade?

What do you recommend?

Torque Damper?

PS: yes,i've disabled TCS.

This website never fails to entertain. Focus ? Wheel hop ? Are you 16 ??
Seriously though, great fun ! Thanks !

 

[Kent253]

This website never fails to entertain. Focus ? Wheel hop ? Are you 16 ??
Seriously though, great fun ! Thanks !

What is wrong with you. You should change your username.

 

[ELCouz]

What is wrong with you. You should change your username.

Yeah for TooOLD [hihi]

 

[ELCouz]

Yeah I agree with you guys... Focus shouldn't be tried on the drag strip... yet along with any Ford products

 

[TurboTechRacing]

Turbo Tech Racing's Upper Engine Mount for the Ford Focus 2.0L (Non-ST). The Upper Engine Mount eliminates movement that your factory mounts have, maximizing torque and the transfer of energy to the driveline. In addition it reduces wheel hop!

Good choice!

 

[TurboTechRacing]

More upper mounts shipping today.

 

[ELCouz]

How much vibration will the upper mount induce to the car?

Already have the electric focus rear mount.