[dbluefocus21]

and what mods?

 

[Bambooburnr]

About 175 at the flywheel estimated.

Cossie CAI
FS Stealth Exhaust
Tune

 

[b16sir1991]

Oops, sorry, thought this was for everyone, no Duratec here.

 

[PumkinSvt]

About 175 at the flywheel estimated.

Cossie CAI
FS Stealth Exhaust
Tune

DAmn just with those mods?

 

[Blackcatn2o]

Oops, sorry, thought this was for everyone, no Duratec here.

It's ok mike we still wonder what other people have too.

 

[PumkinSvt]

I have like 120 to the wheels! lol

 

[Roland07]

Keyword: estimated. Cossie intake is no laughing matter, but if I recall, gains don't stack quite that way...

Waiting for Egz to pipe up here. =)

 

[Bambooburnr]

Yah thats at the fly tho remember it comes stock with 142 If i remember at the fly. My data logging put it at 182 but i dont trust that so I downplayed it to about 175 lol

 

[Bambooburnr]

At the wheels humm with a autotradgic I might be pushing 2

 

[SpeedOften]

About 175 at the flywheel estimated.

Cossie CAI
FS Stealth Exhaust
Tune

with a 2.0L? you're going to need more mods to get to 175 flywheel. You cannot add the suggested increase in hp of each modification and expect to have that o/p.

 

[NAD23ZX3]

Ford makes some restrictive stuff from the factory, but they should be ashamed if a cai and catback can gain 30hp, granted they do make V6 mustangs with single exhaust...

But if it's possible, that just makes it a beast to modify

 

[Buickboy]

Yeah no way a 2.0 will get to 175 flywheel with intake/exhaust/tune.

My 2.0 has IHET and on 93 octane put down 137hp/138tq (roughly 160 crank if you use 15% loss)

 

[jetrinka]

I am putting out 158 HP and 152 TQ at the wheels in my 2.3.

Mods to the motor include

Steeda SRI
F2 Header (wrapped)
Trubendz 2.5" SS Exhaust with magnaflow muffler/resonator
Tuned for 91 Octane by Focussport (added 2% fuel at WOT myself)
F2 balance shaft delete (won't apply to your 2.0. they didn't come with balance shafts)
Autolite 103's gapped to .060 (your 2.0 would use 104's)

 

[Blackcatn2o]

Keyword: estimated. Cossie intake is no laughing matter, but if I recall, gains don't stack quite that way...

Waiting for Egz to pipe up here. =)

Uh EGZ has 0 hp an 0 tq rod bearing failed an seized up.

 

[Blackcatn2o]

well i have 0 hp considering im getting a MTX swap.

 

[mtadd162]

Yah thats at the fly tho remember it comes stock with 142 If i remember at the fly. My data logging put it at 182 but i dont trust that so I downplayed it to about 175 lol

what engine, the 2.0? id be very very surprised to if you put down 170...id be surprised even if u put down 160, its a responsive engine but damn, just estimating from your numbers it would put you at about 150whp (15% loss)

this is from FS, i know its not a cossie intake but i cant imagine, just cause its a cossie, an additional 25hp is gunna be seen from it



i should be getting on the dyno by the end of the week if he can squeeze me in...so im not gunna guess around, i want that dynosheet in my hands before i say any numbers

 

[Weldman0730]

You guys should talk to MLBBaseball, he has some really good numbers, maybe he will say something here...

 

[Bambooburnr]

Like I said I am estimating.

That number was pulled from a WoT run in 3rd while datalogging on flat ground. It pulled that number from the ECU. Wich If i'm not mistaken is where Dyno's pull the flywheel number from. ( Please correct me I'f I'm wrong.)

 

[mtadd162]

i have no idea where dynos get their numbers from...but if its true, you my good sir have a beast/freak

 

[mlbbaseball]

164 whp and everything you can possibly do to a NA engine!! but its on a zetec. If this was done to a 2.3 L dura, you'd make 200 whp NA!!