Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3,560 Posts
Discussion Starter · #1 ·
ok so ive been thining on this and this seems viable for me.
i can get teh svt fron knuckles from cfm.com
will i be able to use my stock calipers or no.
my car is an advance trac model. (its has 4 wheels discs like the svt but has 280mm rotors all the way around)
if i can use my stock calipers it would save me a bit of cash.
which i can sink into hawk pads and oem svt rotors from the same site.
 

·
Registered
Joined
·
3,560 Posts
Discussion Starter · #3 ·
ok but they aint pretty......lol.

ok here you go. it came this way stock. and this is an old set of 19"s they fit on a stock suspension with no rub.
kinda hard to see but it already has the 280mm rear svt rotors and calipers.
with stock 280mm rotors/calipers up front up front (actually the rotors are aftermarket)

frpp's catalogue calls it the competition rally brake kit. it allows you to run 15"wheels.

ok i answered yours. now how about mine... lol.
 

·
Registered
Joined
·
3,560 Posts
Discussion Starter · #4 ·
ok gota pm back from mike at hillbish ford. so iwill get the frpp upgrade kit (seeing as i the caliper is a different part too, shucks)
and then my car should be ready for uber-ness.
i could use the extra braking anyway, with the way the psychos drive around here
 
1 - 4 of 4 Posts
Top