Focus Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hope you guys can help me with my issue on my 2015 Ford Focus SE. I'm wiring in DTRL/Turn signal led light strips that have the sequential turn signal. I have got them all wired in no problem but the issue I'm having is when the car is running the turn signals on the led's don't work but when i turn the car off with the key in the ON position they work fine. The led's are a 3 wire system DTRL, Turn Signal and ground, i have to ground running to chassis ground and the other wires running to the corresponding wires after testing with my multimeter. wasn't sure if there is some switching that happens when the car is off to when the car is running.

Would appreciate any help you guys can provide.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top