Focus Fanatics Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter #1
Im ordering Springs for my ZX3 Focii... It will lower the car 2.3 in the front and 2 in the back, i was wondering... is that too low... has anyone had issues with scraping... my car is stock, but i cant seem to get a mental picture on how it would look... can someone maybe post pics or let me know whats the lowest i can go on springs w.o scraping a stock body...

thanks, David [thumb]
 

·
It's been fun.......
Joined
·
3,042 Posts
That sounds waaaaaaaaaaaaaay low to me. I was under the impression from many who had done it, that 2" was about the lowest most would recommend on the focus. I lowered mine about 1.6" and it is plenty low.

At least in Florida you won't have to worry about plowing snow but tell the alligators to duck their heads.
 

·
Registered
Joined
·
148 Posts
I got the H&R cupkit and it lowers 2.6 in the front and 2.5 in back. I don't rub. just remember to get an alligment and they should tell you if your camber is *****ed up. if it is you will need camber kit. thats all. my modo is The lower the better.
 
1 - 5 of 5 Posts
Top