[Stitch518]

can anyone help with Tips/walkthrough on how to change my inner and outer tie rods please....???? Thanks
i did watch a youtube video on the outer and it seems simple but I've never done the inner.... any tips on inner?? thanks

 

[pasta]

your better off going to mechanic thats a difficult job specialy without a lift

 

[shlbygt]

your better off going to mechanic thats a difficult job specialy without a lift

Tie rods are cake and a lift is not needed.
Just pickup this tool.

http://www.amazon.com/gp/product/B0...d_t=201&pf_rd_p=1535523722&pf_rd_i=B005OH0JHI

This tool is helpful for popping the joint on the outer tie rod without resorting to a hammer.
http://www.amazon.com/Pro-Grade-182...=1411012169&sr=1-6&keywords=pitman+arm+puller

Many parts stores carry them and some are available as loaner tools.

Just measure the original parts to get the alignment in the ballpark before getting an alignment.

 

[pappy60]

Tie rods are easy enough. Just take your time and do get a alignment after you are done.

 

[felixthecat]

Use a hammer= its quicker & your not keeping them.