Focus Fanatics Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
591 Posts
Discussion Starter #1
hey guys about to purchase intrax springs with the kyb agx adjustable dampers off a guy on this site...
question is what rear sway would you go with 24mm H&R or 25.4 F2 bar...the 25 is actually cheaper...ill be keeping my front bar stock 21mm maybe upgrading to F2's adjustable endlinks soon also....are they worth it??

all opinions welcome..this is a svt and it will be taken on the occasional autocross and track days...but is a daily driver! thanks guys!
 

·
Registered
Joined
·
2,380 Posts
If you go over 24mm, you MUST make sure the springs are a little stiffer so you dont snap your rear control arms. IIRC, the 04's have a braced RCA so they dont break with upped bars. I have a 28.6mm rear bar but H&R Cup Kit springs which are a good deal stiffer than stock..
 
1 - 2 of 2 Posts
Top