Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter #1
Hi,

I have removed my supercharger and installed all stock components. I am now puzzled of where the vacuum lines connect to the stock intake manifold.

Does anyone have pictures, anything to help me out?
 

·
PARTS HUNTER
Joined
·
3,001 Posts
It goes basically in the same spots as the ones on the sc if its a jrsc.
 

·
C2H5OH
Joined
·
11,867 Posts
Where they fit. The brake booster line should be obvious as it's the only one that doesn't have a rubber end to fit a nipple. The PCV one is bigger as is the EVAP one. The other EVAP and FPR one can go on either little nipple.

But maybe the SC kit changes the lines, I don't know.
 

·
Registered
Joined
·
344 Posts
the vacuum line goes in the back of the engine and its hard to locate the hole there if your engine is mounted on, you just have to locate the hole with your hand, then bring the vacuum line in there, push it in and done. the vacuum line comes from the brake booster, thats right :D
 
1 - 4 of 4 Posts
Top