Im in the process of wiring everything up to do the intake manifold swap and i am thinking i got the wrong pigtail. I already have the MSD digital window switch. I have already studied the wiring digram in the main write up but have questions
Below are the wire from the pig tail. if looking at the back of the connector with the lock on top the wires are as shown
BLK/WHT-------GRN/WHT-------BLK/WHT
NO WIRE-------BLK/BLU--------WHT/RED
![]()
According to the diagram, you have one blk/wht going to the msd for control, and another blk/wht as a ground Which one coming out of the pig tail is the ground?
Also in the diagram, it shows a BLU/WHT wire going to ground...my pig tail doesn't have that. What other remaing wire goes to ground in my pig tail.
HELLLLPPPPPPP!!!!!!!!!
Below are the wire from the pig tail. if looking at the back of the connector with the lock on top the wires are as shown
BLK/WHT-------GRN/WHT-------BLK/WHT
NO WIRE-------BLK/BLU--------WHT/RED
According to the diagram, you have one blk/wht going to the msd for control, and another blk/wht as a ground Which one coming out of the pig tail is the ground?
Also in the diagram, it shows a BLU/WHT wire going to ground...my pig tail doesn't have that. What other remaing wire goes to ground in my pig tail.
HELLLLPPPPPPP!!!!!!!!!
