Focus Fanatics Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter #1
I just replaced a set of 6 spoke SVT wheels with a newer used set of 17" EAPs from a 2011 SES. I was surprised (at the time) to find my SVT center caps did not fit. I've decided for now to just leave the oval Ford caps in.

Mainly wondering if anyone out there in Focus land has run into the same/similar issue or has a work around?

Too new to post pix, but do have a set of SVT wheels i'm going to sell cheap (at least 2 need straightened - if that's even possible) or i'll just be scraping them. was told i could get $20-30 per wheel.
 

·
Registered
Joined
·
1,355 Posts
Just to let you know the 2011 rims are very similar to the eap wheels, but the only difference is cap size meaning your old svt caps will not fit them. I tryed these overlays off ebay and didnt have much luck with them for making caps for my current set of rims, but maybe there is a better vinyl solution to what your looking for. good luck and ware in ohio are you? I am interested in your old set
 
1 - 2 of 2 Posts
Top