Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 2007 SES sedan. The console had two plastic tabs snapped off. I was able to reattach with super glue. When I went to pop back the console the tabs held but I am unable to get the console flush with the roof interior.

My guess is the metal tabs in the front are not snapping back. The console still works. I just have a gap between the console and the roof.

Thanks for any input. Other that that we're up to 110,000 with no other problems. Thanks for any input.
 

·
Registered
Joined
·
1,212 Posts
Some of those metal clips need a firm whack to get them to reseat fully. Just make sure your plastic tabs are in place first so you don't have to glue them again...
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
I just successfully finished snapping the metal clips in! A little super glue to the plastic clips and elbow grease to metal clips and I saved replacing the console through Ford for about $200. Thanks for the input.5
 
1 - 4 of 4 Posts
Top