Focus Fanatics Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
ok so I am trying to replace my air filter but the screws have these rusted out bolt type things on the bottom of the screw and when I turn the screw the bolts turn with it. is there any way to take the whole filter box assembly out of the car so that I can clamp down on the bolts to get the screws out?

Thanks
 

·
Registered
Joined
·
6,175 Posts
yep.

just take the intake tube off the air box and the throttle body. then you just pull straight up. its stuck in there with rubber gromets(sp) so it will be a little stiff.

it should come out with some force
 

·
Registered
Joined
·
9 Posts
Discussion Starter #3
oh ok sounds easy enough then. I can just unplug the MAF and disconnect the intake and just pull straight up and it should come out?

Thanks
 
1 - 6 of 6 Posts
Top