[turntablez]

Hello. I want to get a better looking MAF housing for my Zetec. But I want to keep the stock size. CFM sells a nice one. There are 3 sizes to choose from in this link below. What size should I get that will keep me stock? Thanks for your time.

http://www.ebay.com/itm/Aluminum-MA...&fits=Model:Focus&hash=item20a8791b66&vxp=mtr

Todd

 

[1turbofocus]

Any MAF you change to you will need a custom tune for them to work properly

Tom

 

[sailor]

Double check your stock one with an ID measurement for it to work without a tune.

I'd guess the smallest one listed there, but you should measure yours to be sure.

 

[1turbofocus]

Not only size changes the maf readings , the depth of the sensor , turns before or after the MAF , length of the MAF , if you change from stock MAF housing you will need to tune it

Tom

 

[turntablez]

Ok thanks for your replies. I would rather not tune so I will stick with the stock one. I was just going for looks.

 

[angelwolf71885]

you could paint the outside for a better look or with the right liquid type plugs even chrome the MAF but i would stick with painting the outside of the MAF