Focus Fanatics Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 2009 se coupe manual, long story short, i did a burnout, and after said burn out i had my engine start acting strange, will not go past 3500 rpm unless floored while in gear, the spedometer has stopped working as well i have replaced the vss sensor and maf sensor, it was throwing a code for the maf, i have disconnected the battery for an hour, i have disconnected both terminals and ziptied them together, nothing seems to be working, any help would be fantastic, it is my only car
 

·
FF Affiliate
Joined
·
30,152 Posts
Might of hurt the spedo wheel in the trans , have you removed the vss an looked in there why some one turned the wheels so see ?

Tom
 

·
FF Affiliate
Joined
·
30,152 Posts
Might of hurt the spedo wheel in the trans , have you removed the vss an looked in there why some one turned the wheels so see ?

Tom
 

·
FF Affiliate
Joined
·
30,152 Posts
Might of hurt the spedo wheel in the trans , have you removed the vss an looked in there why some one turned the wheels so see ?

Tom
 
1 - 7 of 7 Posts
Top