Focus Fanatics Forum banner

What do u run??


  • Total voters
    12
1 - 9 of 9 Posts

·
Registered
Joined
·
335 Posts
Discussion Starter #1
Which type spark plugs do u run in ur 1st gen Focus....

It's time for me to change the plugs in my 01 Zetec, Im about to hit 80k miles finally.... I've already put an MSD Coil and MSD 8.5mm wires and CAI on car.....

I'm thinking about either going with the NGK Iridium or the E3 plugs, as I have always ran those in previous cars and they've always done me well.... But not sure on the Focus, as this is my first Focus, and i've heard they can be picky.....

Also, I know when u run the Screamin Demon Coil Pack and LiveWire Set, u can increase ur plug gap from .050" to .065" ..... Can u do the same when running the MSD Coil and Wires??
 

·
Registered
Joined
·
2,807 Posts
i run the copper core Motorcraft azfs22c
or the motorcraft platinums
 

·
Registered
Joined
·
331 Posts
I put in motorcraft platinum. Wanted to put in NGK, previous good luck, but auto zone was out at time. Think that's what came out too. Been good so far.
 

·
Registered
Joined
·
35 Posts
If you can, buy copper plugs. They are cheaper and don't last as long, but they do offer a better spark. Here is a guide to the whole job, including changing the HT Leads:

 
1 - 9 of 9 Posts
Top