Focus Fanatics Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
195 Posts
Discussion Starter · #1 ·
I have ask this question before some people told me gap them .60. but under the hood it say 1.2 on the sticker. I have the denso Iridium plugs. If i gap them to 1.2 is that bad
 

·
Registered
Joined
·
54 Posts
Not sure where you saw 1.2 [dunno]

Gap the plugs to .060 inches and you will be good. That's the only thing you need to know :) And if you don't already have the copper core plugs, get them [cheers]
 

·
Registered
Joined
·
810 Posts
1.2 inches? holy crap dont do that bro, stick to the .060
Be careful while gapping them, you dont want to rub off a piece of the thin coating over the electrode.
 

·
Registered
Joined
·
11,906 Posts
That could be 1.2mm...... but I would stick with .060 inches
 

·
Registered
Joined
·
11,906 Posts
^^^^ picky picky [poke]
 

·
Premium Member
Joined
·
3,617 Posts
If you have a spark plug gapper stick with .060, if you need one they can be picked up at any auto store for $.99 and then let the gapping begin!
 
1 - 9 of 9 Posts
Top