Focus Fanatics Forum banner
1 - 1 of 1 Posts

· Registered
35 Posts
Discussion Starter · #1 ·
In my "new" 2001 ZX3 (manual seats, no power adjustment), I noticed that I did not have a seat belt light or chime. Mostly out of curiosity, I started poking around and found the big connector at the left front corner of the driver's seat was unplugged and tucked back under the carpet. I plugged it back in, and I have the seat belt light/chime back.

Now other searching on the forum says that I should have had an airbag light when this was disconnected, but I did not have that. The light acted normally, came on for a few seconds on startup and then went off. What gives? Is the airbag light staying on when this connector is unplugged just for power seats?

No real issue that I know of, just mostly curiosity here.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.