[rebelx]

Is there a simple plug and play lighting solution for keeping the current tails as is (maybe the reverse light as well) but solely replacing the current bulbs with LED equivalents? I would assume that the brake and turn lights would appear brighter to the people behind me. Ideally, I wouldn't need to use any resistors or the like to make it work. Possible?

 

[ThatDaveMartin]

You can put LEDs in as a direct replacement for the reverse bulbs, but not the others.

 

[cbdallas]

Putting LED bulbs into a housing that isn't designed for them will yield you bad lighting in some cases. I wouldn't replace tails & brakes with LED. Replacing turns may cause a fast blink.

 

[SilverPony2001]

Is there a simple plug and play lighting solution for keeping the current tails as is (maybe the reverse light as well) but solely replacing the current bulbs with LED equivalents? I would assume that the brake and turn lights would appear brighter to the people behind me. Ideally, I wouldn't need to use any resistors or the like to make it work. Possible?

http://www.focusfanatics.com/forum/showthread.php?t=315586

Also check the DIY sticky at the top of the forum.