Focus Fanatics Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
930 Posts
Discussion Starter #1
Does anyone know if the nylon adjustment/bushing ends are removeable from the cables? They look like they are threaded...

 

·
C2H5OH
Joined
·
11,867 Posts
Yes.
Pull the orange clip out.
 

·
Registered
Joined
·
930 Posts
Discussion Starter #3
Ugh...
So it isn't threaded...the orange clip holds the cable to the plastic piece?
I was trying to remember, isn't there a second plastic piece that slides inside the cable side piece, and the orange clip engages it for adjustment?
 

·
C2H5OH
Joined
·
11,867 Posts
Think back to how you adjust the cables ... you'll figure it out.
 

·
Registered
Joined
·
930 Posts
Discussion Starter #7
Okay, brainstorming..."The unbreakable, slop-free shifter bushing!"

I figured out how to use the 'grooved' cable and a C-clip, inside two drilled-out, threaded rods (for cable adjustment), and a threaded collar to lock them together...and of course, a machine bushing end on one end of the threaded rods.
:)
 
1 - 9 of 9 Posts
Top