Focus Fanatics Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
487 Posts
Discussion Starter · #1 ·
I drive a zx3 and just recently my 3 main bulbs burnt out so I cant see the rpms mph

I have taken the Gauge cluster completely out of my car and I can see the back of it Im pretty sure the little green things in the picture below are the bulbs I just need to know how do I take it out here is the pic
 

·
Registered
Joined
·
487 Posts
Discussion Starter · #2 ·
I have tried turning them counter clockwise but they still wont come out Im applying allot of force its still not comming out. Im afraid to pry at it too hard and break it.
 

·
C2H5OH
Joined
·
11,867 Posts
Yup, those are the bulbs.
There is a little catch on the tabs. But it doesn't hold much and shouldn't need to be fooled with. Just counterclockwise and they should come out.

Maybe use a pliers for a bit more leverage. But don't squeeze too hard.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top