Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter #1
Long story short...............

Power Steering pump died
All fluid leaked out, thus it was not lubricated

I ordered a new pump from autozone

Driving home from autozone w/o power steering the bearing at the pulley locked up and i believe the pulley ripped right off and my serpetine slipped off - of course

I think this is what happened, too dark and too frustrated right now to get under the car completely and double check (but how else would the serpetine just magically fly off - meaning its still intact and theres a huge slack in the legnth)

Question 1.

Will the new power steerring pump i ordered come with an attatched pulley?
If not, where do i get a new one and what size?

Question 2:
What size belt do i need for the serpetine including my jackson racing supercharger (SVT on stock pulley size)


Thanks for the help in advanced
Rob
 

·
Registered
Joined
·
1,067 Posts
pump doesn't come with pulley, you need to either find the old pulley, and remove the busted shaft from it, or buy one from Ford.

I don't know about youir belt size, but there was a thread recently about that, try searching real quick, you should find one that pretty recent (within this week, I'm thinking)
 

·
Registered
Joined
·
109 Posts
Discussion Starter #4
scott

its somewhere on 520 between us1 and fiske

good luck!

What are my alternatives?

Can the same sized universal pulley be applied?
 
1 - 4 of 4 Posts
Top