Focus Fanatics Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
CEL came on ran a scan it’s P0452 says evap pressure sensor/switch low DTC. I clear it restart the car light doesn’t come back. Park let the car sit message comes back when I start again. Anyone else have this issue or can point me in the right direction of repair? Thanks
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
Thank You pasta for the insight. My question is has anyone had this code before and what fixed it? I reset to see if it was a fluke code obviously not, it was strange it didn’t come right back after clearing as well.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #4
Alright, so finally got it in to be looked at found the cause was a rodent chewed the wires that go to the tank. so having the wires repaired/replaced. Now to exterminate the squirrel to ensure the issue doesn't return.
 
1 - 4 of 4 Posts
Top