Focus Fanatics Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
387 Posts
Discussion Starter #1
I just bought some PIAA fogs for the Focus. I planned on cutting the bottom grill and mounting them there, but I don't really have anything to mount to. So I took the grill off, and I thought about mounting them in the stock fog light location (mine didnt have factory fogs). If I do this, I think I'd leave the grill off, and put in some mesh where the factory grill was. How would this look?
 

·
Registered
Joined
·
541 Posts
Prolly would look good if you take yer time and do everything right. Even if ya had to cut out some of the front bumper sand it really good and paint it just on the edge of the cut.

get some pics of it once its done.

Brandon.
 

·
Registered
Joined
·
758 Posts
yeah i agree with Knucles, but if you get mesh, dont get something that looks cheap, like the stuff you can buy at Home Depot, and if you really wanted to, just modify the stock grille, and it will probably look just as clean, and still leave the flow of the front end going as well :) good luck, and post pics when you're done!
 
1 - 3 of 3 Posts
Top