Focus Fanatics Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
235 Posts
Discussion Starter #1
So, my 2000 Focus just passed 66,000 on the clock and over the past week or not I've been hearing some clunking.. So I crawled under the car today and found the problem, the infamous focus sway bar endlink on the passenger side is all bent and what not, so after some reasearch, which would you guys do.. Replace the stocker for 20-30 bucks or go big with a set of adjustable F2 endlinks for 90 shipped? I would go for the F2 pieces, but do they really help anything handling-wise?
 

·
Registered
Joined
·
82 Posts
The OEM part has since been revised twice, and is now FAR beefier than what the car came with. In fact, I did mine last weekend on my 2001, and the Monroe Premium ones from the local parts store were $17CAD each, and the bushings were 2x the size of the factory part.
 
1 - 2 of 2 Posts
Top