Focus Fanatics Forum banner

1 - 6 of 6 Posts

·
Premium Member
Joined
·
7,498 Posts
Discussion Starter #1
yup I was working on my car and put everything back togther and thats what showed up.






























but guess what it was! if you figure it out ill give ya some rep

I already know what it is but I wana see if you guys know[loveff]
 

·
FF Cleaning Squad
Joined
·
11,959 Posts
Had bad connection to the PCM?


Thats all I can think of.
 

·
Focus Hoarder
Joined
·
3,633 Posts
XD did the same to mine...

but I tripped dash's 4 seperate times from 4 seperate reasons

1 had the key to focus 1 to close to focus 2's ignition
2 wire right next to the battery ( Zetec) looked to be connected but it wasn't
3 the plug behind the dash wasn't inserted fully
4 removed a relay that killed the power to the ECU XD
 

·
Premium Member
Joined
·
7,498 Posts
Discussion Starter #4
feral got it I had a ground that broke
 

·
Focus Hoarder
Joined
·
3,633 Posts
Im the master at messing up my car but can always fix other cars without a prob?? did an engine swap (on my nephews crapalier) and went flawless I change the cluster on my car and everything went nutz ROTFL

P.S. Those Grounds are messed that ford uses I look at my 1991 Ford Areostar grounds and I look at both my Focuses and I can tell ya I cant bend the Aerostars grounds but I already broke a few on the focuses XD

Im pondering redoing all the ground wires with thicker wire and have all the eyelets replaced forged aluminum soldered on eyelets those cheap eyelits are more fragile then glass
 
  • Like
Reactions: PumkinSvt

·
Premium Member
Joined
·
7,498 Posts
Discussion Starter #6
Yea I wana make my grounds better

Rep for you sir!
 
1 - 6 of 6 Posts
Top