[Andy_Dane]

I'm assuming it's just the bearings and dirt making it rattle, so I've followed an old thread on here to get as far as removing the heater fan. However, it appears that mine has the mechanism for left hand drive pedals, and the heater fan won't fit past it, so I can't fully remove it from the plastic cylinder it sits in.

Anyone got any idea where I go from here?

Cheers,
Andy

 

[sailor]

I'm afraid you'll get a lot of "views" before one of our members from the UK or elsewhere using RHD sees this for real help.

Good chance you'll need to unbolt/move something a bit if you can't find a way to wiggle it past the obstruction.

Does your version use a crossover set of bars to work LH brake/clutch from the right side? (Had a Mitsubishi that did this to make RHD into LHD)

I'm guessing your fan is on the left (passenger) side, mirror image of our LHD version.

Pedal assembly on ours (LHD) detaches from the floor easily & can be moved quite a bit without detaching everything, did this to ease clutch master cyl. installation on mine.