Focus Fanatics Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,307 Posts
Discussion Starter #1
Okay i got my hids from the rpm store and now i noticed the plug is right but the wires are outa place... the focus has green black and green yellow and a brown or black wire in the harness and rpm store has white black and red and the black is not in the center where the black is on the plug for the focus what do i need to do what order do they need to go in
 

·
Banned
Joined
·
4,142 Posts
I have a extra set of 05-07 harnesses laying around lol.


From what i can see The gray or black wire is going to be ground obviously.

Green yellow or the orangish color is going to be the red wire area. It's the constant or low beam power area.

The Green blue wire is the access or high beam wire. So the white should go there.

Black to black power them up try the functions and enjoy. Make sure to hook both up the same way and at the same time. Running one HID ballast and bulb can be potentially harmful to the kit.
 
1 - 2 of 2 Posts
Top