[1stTimeFocus00]

Im trying to remove my panel but am little success. I have all the Torx screws out, 2 socket screws out of the handle, one Torx screw out of the door release, and im about to findle with the mirror. But what do i have to do with the Crank for the window? i tried to pull it off but no luck? Any help is appriciated.

 

[Kauai Guy]

For the window crank theres gonna be this metal clip between the handle itself and that plastic ring. Its kinda shaped like the symbol for OMEGA. The two legs that you have to release are either going to be facing towards the neck of the handle or away.

I use a flat head screwdriver to pry it out, but there are special tools just for this to make it easy. [wrenchin]

 

[Khanaar]

a trick i learned for the handle clip is to use a cloth towel, one fine enough to poke between the handle and door, and saw it back and forth, the fibers will catch the clip and tug it out without wrecking or scratching your panel.

 

[1stTimeFocus00]

thanks guys for the help. got it all taken carre of today.

 

[rebelboy6121987]

when i took my door panels off, the hardest part was the window cranks