Focus Fanatics Forum banner
1 - 20 of 20 Posts

· Fear the TurboSnail!
Joined
·
7,033 Posts
Discussion Starter · #1 ·
I love my ZX4. Here are some pics of before and after. Feel free to add your own before and after pics.





Notice the brakes in this pic compaired to the pic before.

Spoiler in this one.











Thats all for now.
 

· Fear the TurboSnail!
Joined
·
7,033 Posts
Discussion Starter · #5 ·
Very easy. It is really a plastic piece. Cost about $20 from ford. I don't remember the part number. You don't have to buy the entire cluster. I'll see if I can find the part number later today. I may still have the original box with the old cluster cover.
 

· Premium Member
Joined
·
8,027 Posts
Very easy. It is really a plastic piece. Cost about $20 from ford. I don't remember the part number. You don't have to buy the entire cluster. I'll see if I can find the part number later today. I may still have the original box with the old cluster cover.
You can get them on eBay for like $4 plus shipping [clap]
 

· Fear the TurboSnail!
Joined
·
7,033 Posts
Discussion Starter · #8 ·
The ebay ones are metal piece of [:)][:)][:)][:)][:)][:)]*. I had one and hated it. They are really cheezy. The one I have is a Focus ST bezel. Its worth the 20. Plus you don't have to almost destroy your current bezel to install it. Oh and also the spoiler is an ebay one. Yes it is plastic instead of fiberglass. However it is built very nicely. It is just as strong as my buddies fiberglass one with almost no flex to it. Picked that up for $130 painted and shipped.
 

· has a screw loose
Joined
·
9,964 Posts
Mave , what kind of pedal kit is that ? How good did it go on , any bending ? I've been looking for a set and I can't seem to find any that look good to me .
 

· Fear the TurboSnail!
Joined
·
7,033 Posts
Discussion Starter · #13 ·
Okay first. The pedal set (which I changed to a SVT set) was bought from pep boys. Fairly easy to install. However I used 2 screws and screwed them into the gas pedal. Second. The OEM spoiler is one from ebay. You know the blow plastic ones. However it holds up just as well as the OEM fiberglass one and it lighter. I had a shop install it for $80. The last time I installed a wing it was a little offset. I didn't want to screw this one up.
 

· has a screw loose
Joined
·
9,964 Posts
I've been looking at the pedal kit from CFM that has Focus on the pedals but I've seen a few Momo's that I like too. decisions , decisions !
 

· has a screw loose
Joined
·
9,964 Posts
I put the SVT pedals on my car and love them. I'll try to take pics this weekend if anyone wants to see them.
Any fitment issues or did they go on without any problems ? Do you have a link or a place online that sells them ? I was looking at sportcompactonly.com at the momo's .
 

· Fear the TurboSnail!
Joined
·
7,033 Posts
Discussion Starter · #17 ·
The SVT pedals went on without a problem. Just the gas pedal is a full replacment. So three bolts and your going to be under your driver side dash for a few minutes. Well I can't find them anymore on northcoast performances website. Thats where I got mine.
 

· Freeskiing Fanatic!
Joined
·
5,733 Posts
looks good man. i really like your wheels.
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top