[indy_11]

can someone give me a link to them, i think mine are shot

 

[Slammed_2.0]

rockauto.com


Lots and lots and lots of Great quality OE stuff. They carry the Moog sway links!

 

[indy_11]

Thanks, I tried there but all they have are the rears, are raybestos end links any good?
Posted via FF Mobile

 

[BLAKNBLUE]

Napa or any auto store usually carrys them..call around
Posted via FF Mobile

 

[st12131]

Just look up a 2010 focus on Rockauto, there at the bottom $19.49 ea.

 

[Slammed_2.0]

^^ I know they had them, I came close to buying them but ended up getting dominics links

 

[dirtbrown]

^^those things are gonna make even more noise

 

[indy_11]

found them, they weren't listed under 2011 so i just went to 08. thanks again

 

[Slammed_2.0]

^^those things are gonna make even more noise

Not so... Mine are not noisy at all

 

[Phokus]

^ since he is lowered alot he may have altered the angle of the how the endlinks are positioned and therefore no noise is caused.

I have the FRPP kit and it made a lot of noise.
I ended up getting new joints that were teflon coated to be tighter and they were great but the noise came back. After further investigation it was determined that the endlinks need to be as straight as possible vertically.
I added some spacers and now all is good.

some info here

http://focusfanatics.com/forum/showthread.php?t=271894

 

[Slammed_2.0]

^ since he is lowered alot he may have altered the angle of the how the endlinks are positioned and therefore no noise is caused.

I have the FRPP kit and it made a lot of noise.
I ended up getting new joints that were teflon coated to be tighter and they were great but the noise came back. After further investigation it was determined that the endlinks need to be as straight as possible vertically.
I added some spacers and now all is good.

some info here

http://www.focusfanatics.com/forum/showthread.php?t=271894

I may say it is how much im lowered. They don't knock, cling, or make any random noise.. Only noise i hear is my tires..

 

[indy_11]

Endlinks came in today. Do I need to grease them up before putting them on or just slap them on and go?
Posted via FF Mobile

 

[Miller88]

Do they have the zerk fitting?

 

[indy_11]

The small 90 degree elbows? Yes
Posted via FF Mobile

 

[loudfocus01]

They are shipped with grease that they put in there for storing them.
You need to fill them until all of the old grease comes out and you start seeing
your new grease coming out by itself. I learned this the hard way on my first set.
I installed them as they were and they didn't last long at all.

 

[indy_11]

Mkay, and where can I get the grease and a grease gun?
Posted via FF Mobile