Focus Fanatics Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
975 Posts
Discussion Starter #1
i have an ebay boost controller that came with my turbo kit.
i have seen a bunch of different ways to hook it up but what it the correct way to run a MBC. i know it comes from the compressor then to the WG but why does it come with a "T" and also which nipple is which on this controller.
 

·
I AM DA FOCI FANATIC
Joined
·
3,715 Posts
its so you can run it up through the firewall and mount it next to the driver so you can change boost while driving.
 

·
Registered
Joined
·
975 Posts
Discussion Starter #3
so i dont need the "T"
 

·
I AM DA FOCI FANATIC
Joined
·
3,715 Posts
no you can run it from the IM to the WG and just have the controller outside.
 

·
Registered
Joined
·
975 Posts
Discussion Starter #5
so which line on the controller goes to the wg
 

·
I AM DA FOCI FANATIC
Joined
·
3,715 Posts
It looks to me like the top goes to the wg, and bottom one with the arrow goes to Intake Manifold.


Go ahead and blow on one and adjust the screw (Start with it almost all the way out) has you tighten the screw it should be much harder to blow through. If it is than that one goes to the IM, and the other goes to the WG.
 
1 - 6 of 6 Posts
Top