Focus Fanatics Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
248 Posts
Discussion Starter #1
i am going to attempt to do this sub box for my trunk.....i am going to do one on each side of the hatch.....can anyone help me with materials or.....how to's..////anything would be great.....is there any kind os support device for the sub itself or does it just hang in the air?....i am a rookie at best at this....but...i want this car to be modded by ME!......so anything would work...thanx
 

·
Registered
Joined
·
1,660 Posts
have you looked on the web for prefabed boxes sometimes a good starting point for beginers
 

·
Registered
Joined
·
248 Posts
Discussion Starter #3
im kinda in this DIY thing.....dorky...but i want it to be my design....if it dont work then hey it doesnt work.....
 

·
Registered
Joined
·
2,228 Posts
here is a great how to that i used when making mine.
give you the basic idea on fiberglassing.
all you have to do is incorporate your design into it.
i can give you some tips on molding it into the sides of your trunk if you need help. just pm me
ill be doing the same thing with mine in a few months



how to - http://www.teamfocus.us/speakerbox.htm
 

·
Registered
Joined
·
38 Posts
sub mounting

caraudiohelp.com sells some of the best vids on fiberglassing and they make it understandable![thumb]
 

·
Registered
Joined
·
250 Posts
Don't forget to calculate the air needed for your sub.
Each sub have different air needs.
This information usually comes with the sub. Less air is needed if you are gonna be putting a vent. And, to make it even more interesting, the vent needs to be a certain lenght and certain diameter. hehe

Don't give up, you should be ok. Have fun.
 
1 - 6 of 6 Posts
Top