Focus Fanatics Forum banner

Lowering kit or sway bars?

831 Views 3 Replies 4 Participants Last post by  hotdealz25
Opinions on what would handle better?
2006 SES with stock suspension, and 24 mm H&R front and rear sway bars OR 2006 SES lowered 1.5 with koni kit or H&R kit with stock sway bars.

So for a one part upgrade, which would be the best for handling, the sway bars or the lowering kit.?
1 - 4 of 4 Posts

· Registered
Joined
·
3,174 Posts
If the kit includes matching dampers, then the lowering kit would probably give the best upgrade to your handling.
 

· Registered
Joined
·
747 Posts
i would say to go with the springs and dampers first. And someone correct me if i'm wrong but i thought only eibach made a kit for the '06's. The H&R sway bars are probably a little too much to handle for the stock springs/dampers.

Or if you want to save a few bucks, what i did to start was got a progress 22mm rear only sway bar, and it improves handling well for what it cost.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top