Focus Fanatics Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
994 Posts
buy a 2.5" zetec flex pipe and add 5" of pipe, then just add a SVT 3 bolt flange and 2 (O2) bungs.

then you'll have a 2.5" ORP and flex.

Remember even if you get an SVT ORP, you'll still have the factory flex, that has a center dia of 2"
 

·
PARTS HUNTER
Joined
·
3,001 Posts
Unless u get a bigger flex^^ I think cfm has some in 2.5
 

·
Registered
Joined
·
994 Posts
Unless u get a bigger flex^^ I think cfm has some in 2.5
First of all, you can get a svt 2.5" flex for cheaper here ($120 shipped) than CFM

http://www.mandrelexhaustsystems.com/servlet/the-24/00-dsh-04-FOCUS-EXHAUST-FLEXPIPE/Detail


or you can SAVE a ton of money on your flex and ORP, and just buy a 2.5" or 3" flex here and do what I said in my first post...

http://www.mandrelexhaustsystems.com/servlet/the-18/00-dsh-04-FOCUS-EXHAUST-FLEXPIPE/Detail


used ORP(2.5") [$150] + flex (2.5")[$120]=$270

zetec flex w/out 2 bolt cat flange (2.5")[$120] + svt 3 bolt flange[$25] + 2(O2) sensor bungs[$20] + 5" of straight 2.5" pipe/welding labor [$30]= $195

You could even replace that 5" f sotraight piping w/ a high flow car to create you're own HFC too!
 
1 - 6 of 6 Posts
Top