Focus Fanatics Forum banner

Looking for a proper Intake Manifold? Look no more!

2270 20
For those who have been around, Chaz and Jim co-made a intake manifold for our cars. They did a few runs of them and went silent for a long time.

After we beg and begged. They are going to make one last run!


If you remember Jim's focus it made over 600whp using this manifold-


So if this interest you and you havent seen this on the fj fb page or the ff fb page let me know!






this is on a zetec






on a svt






[ffrocks]
1 - 20 of 21 Posts

· Registered
Joined
·
265 Posts
For those who have been around, Chaz and Jim co-made a intake manifold for our cars. They did a few runs of them and went silent for a long time.

After we beg and begged. They are going to make one last run!


If you remember Jim's focus it made over 600whp using this manifold-


So if this interest you and you havent seen this on the fj fb page or the ff fb page let me know!






this is on a zetec






on a svt






[ffrocks]

whats the craic with this,????

i have an svt with cfm 67mm tb, would this be a straight swop???, what are the benefit on an n/a engine with a good tune???
 

· Premium Member
Joined
·
9,219 Posts
Discussion Starter · #4 ·
craic? im sorry im not sure what you mean.

and if you have a svt this wouldnt need any modification besides the TB plate.

Benefits, are midrange to toprange hp. better flow with this manifold.
 

· Registered
Joined
·
265 Posts
craic? im sorry im not sure what you mean.

and if you have a svt this wouldnt need any modification besides the TB plate.

Benefits, are midrange to toprange hp. better flow with this manifold.
sorry mait, its english/irish slang/ the craic is like saying whats the deal lol,

me living in london might just be a bridge too far, as we have custom fees, [:(]
 

· FF Affiliate
Joined
·
33,177 Posts
Actually there is no dynos of this manifold to show what it does so its all guess and speculation

Topspeed manifold is crap and no one was able to back up the dynos topspeed posted they got on a NA SVT

I may grab one of these my self

Tom
 

· Premium Member
Joined
·
9,758 Posts
Actually there is no dynos of this manifold to show what it does so its all guess and speculation

Topspeed manifold is crap and no one was able to back up the dynos topspeed posted they got on a NA SVT

I may grab one of these my self

Tom
Actually there is someone who has it on an NA svt and he had it on the dyno and just what I said he gained HP up top and lost a bit of tq down low.... And he wasn't done tuning. I will see if he has an account on here so he can chime in.
 

· Premium Member
Joined
·
9,219 Posts
Discussion Starter · #12 ·
And Jim also used this manifold to support his 600whp+ build
 

· FF Affiliate
Joined
·
33,177 Posts
And Jim also used this manifold to support his 600whp+ build
I did 723 with the ford racing intake , a bad intake will make good HP with enough boost put through it

Im not talking the intake down and even said I may be interested in one my self , just being realistic , I have sent many people to jim wanting this intake and have sent 2 of them emails about this

Tom
 

· Premium Member
Joined
·
9,219 Posts
Discussion Starter · #19 ·
all well and good saying 600whp, but it would be more helpful if you mentioned the 1,000 + dollars worth of mods old jimbo has along with this manifold [dunno]
hey i said support, not add 600 lol [cheers]

but yes his car was built properly and a beast at that.

we don't have much support for aftermarket manifolds for those looking to build power.

TS takes forever if you even get it..
Focus Central is out of business sometimes their intakes pop up here and there
FR needs modifications for proper fit


I have a focus central manifold currently, and will be selling it soon to jump in on this.
 

· Premium Member
Joined
·
9,219 Posts
Discussion Starter · #20 ·
GUIIISEEE CMONNN lol

this that schiiittt you want for powah
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top