[GodLovesUgly]

i say snail because i won't have time/money to get this finished until my next autox season, which is in March. YEP! i'm going to SMF!!

i do however need your help as this will be my most extensive performance install.
first off, here is a list of what i currently have.

Comp Turbo W/ V-band installed
SPA manifold with adapter plate for Evolution WG
~ Siemens Deka 60lbs injectors
3" CFM MAF Tube
Diablo MAfia
Turbonetics Evolution Wastegate
2.5 dowbpipe with V band
Greddy type RS BOV
OBX Intercooler and Piping
Oil lines, from head to turbo and turbo to oil pan
Greddy Profec B Spec II boost controller
Auto Meter Ultra light Boost gauge
Welded Oil Pan
J&S safegaurd
Xcal3

What i NEED

Catch Can
Crankcase
Vac Hoses


i know i need to get an A/F gauge, Tune, and Knock sensor gauge (not req. but i want it)

but i wasn't sure what else i needed at this point?
i know that i should upgrade my clutch and flywheel, but that will have to wait until March.

i'm planning an install meet at my house on October 30th, so i'll have some friends give me a hand with the actual install.

thanks for the help, i'm sure i will have a lot more questions..
GLU

 

[ZXthrizzle05]

what about your clutch status and flywheel and limited slip differential

 

[GodLovesUgly]

ha, in my OP i said that i will not be upgrading the clutch/flywheel until next spring. LSD will come sometime around then as well.

 

[focusedaddiction]

Awsome, welcome to boost....& ...SMF you're gonna love it!!!
Wish I was closer to give you a hand. We may be that way in the spring to pick up a car & swing by.
Good luck on the build, any quest. Just ask.

 

[GodLovesUgly]

i know i cannot wait!! i've been waiting for some more boosted autox vids.. ??

ha, i need all the help i can get!

back to my original question.. what else can you guys see that i need?

 

[drunkyoda]

a catch can

 

[ZXthrizzle05]

lol sorry i missed the clutch part of your OP. Me so stupid sometimes

 

[SVTF410]

I am moving to SMF also, I am wrapping up a vortech install right now.

 

[GodLovesUgly]

what else??

 

[PumkinSvt]

vacuum hoses??

 

[Mother Focus]

CFM baffle instead of the PCV and maybe a fuel pump depending on what you have and a BAP.

 

[GodLovesUgly]

unsure what vacuum hoses would be for.. explain??

is the baffle the same thing as the CFM crankcase?
i thought i didn't need a BAP unless i was going for 300+?

 

[Mother Focus]

Yes the crankcase vent, vacuum hoses for the wastegate, boost gauge, turbo and BC but that I will leave it until you know length and diameters. What is your hp goal?

 

[GodLovesUgly]

gotcha.

well since this is strictly an autox car i want usable power in 2nd gear.
so maybe 250? i'm not really sure because i've never been in a boosted focus.

 

[Mother Focus]

Do you have a built bottom end? What year is your focus? For 250 your 60lbs is a bit overkill but good if you want more later.

 

[Mother Focus]

Just checked your profile to find out is an SVT, your good on the fuel pump, new fuel filter would be good too. For a stock bottom you can get more than that.

 

[GodLovesUgly]

if i'm going with a 3" exhaust what are some recommendations for a cat/orp?
does anyone make a 3" one?

 

[wrc_fan]

SMF = make your own stuff

Custom turbine flange back or go home

Good luck, watch out for those honduhs. FWIW all cars but one (mini s) at nationals were civics. And get moar tyre!!!

 

[GodLovesUgly]

i saw that, do you know if those honduhs were boosted?
i have one 94 si locally that just went turbo so he will be my competition. as well as a VW 227 boosted to hell.

i want more tire, but that means i'll need to go custom..

 

[focusedaddiction]

do ya got emisions testing? skip the cat []
i'm building a 3 " out the front bumper..lol SMF= go big or go home..hehe! 15x10's with 275/35/15 A6's